>News>Leshan dynamic
Blow Moulding Process

Announcer:Leshan  Time:2019-06-28


Blow moulding a shape is a common industrial process. The example shown below is of the production of a plastic bottle. The plastics normally used in this process are: polythene,PVC and polypropylene.
The process is similar to injection moulding and extrusion.
1. The plastic is fed in granular form into a 'hopper' that stores it.

2. A large thread is turned by a motor which feeds the granules through a heated section.

3. In this heated section the granules melt and become a liquid and the liquid is fed into a mould.

4. Air is forced into the mould which forces the plastic to the sides, giving the shape of the bottle.

5.  The mould is then cooled and is removed.




COPYRIGHT © 2016 Guangdong Leshan Intelligent Equipment Corp., Ltd ALL RIGHTS RESERVED