Y series blow molding machine

  • Product Features
  • Product Parameter
  • Videos

Specification:
1.Accumulator are compound in the main body which can avoid the explosive fissile convergence line which is result from parision combined in the material-storage-on-top accumulator;
2.The new platform design for the die head, the lifting platform and head-rising separated from each other, not only making the rise of the die head more stable, but also the die head can move forwards and backwards.
3.According to the double pump, proportion flow valve, the power consumption can be decrease;
4.Automatic lubrication system;
5.It also has down blow pin, down widen device, double clamping and robot hand;
6.It could be optional configured with telemaintenance system;
7. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
8. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
9. Strong clamping force with high pressure and double crank links to lock the mold.
10. Two ways of operating: automatic and manual.
11. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
12.The screw diameter is 90mm ;
13.The maximum blow volume is 30L,PE、PP、PS、PC、PVC can be used, suitable for production of chemical barrels、auto parts and sprayer etc.

Leshan blow molding machineLeshan blow molding machineLeshan blow molding machineLeshan blow molding machineLeshan blow molding machine

Technical Data

General Features

Carriage horizontal shuttle stroke

mm

/

Dry cycle

sec

5.8"

Clamp force

kN

360

Pressure of Hydraulic System

Mpa

14

Pressure of Pneumatic System

Mpa

0.6-0.8

Pressure of Cooling System

Mpa

0.2-0.3

Air consumption (estimated)

M3 / hr

5

Minimum pressure for cooling water to machine

Mpa

0.2

Power of pump motor for hydraulic movements

kW

15

Power of servo pump motor(if needed)

kW

(7.5)

power of Die head heating 

kW

22

Power of knife

kW

/

Total power installed (estimated, maximum)

kW

 85.5

Extruders

Screw diameter

 mm

90

Extruder rotating speed

/

20~65

Power of electric motor

kW

37

Power of barrel heating

kW

17.5

Max throughput = PE

kg/h

160

 

 

 

Mould Dimensions

Maximum width

A

mm

930

 

Maximum length

B

mm

1270

Minimum Depth

C

mm

225

Clamp open max daylight

D

mm

1000

Open stroke

E

mm

550

Max weight of mould

 

kg

800

Production Possibilities

Cavities

 

1

 

   

      

Max center distance

mm

/

 

 

 

Max container width

mm

900

 

 

 

Max container height

mm

1120

 

 

 

Max container depth

mm

390

 

 

 

Container capacity (estimated)

lt

60

 

 

 

Machine Dimensions

Maximum width

mm

2100

Maximum length

mm

5940

Maximum height

mm

3800

Total weight

kg

11500

 

We provide one year equipment warranty, free installation for domestic market, for charging debugging in oversea market and all-life services. Equipment parts are free replacement for one year expect for the rapid wear parts. 

Leshan blow molding machineLeshan blow molding machineLeshan blow molding machineLeshan blow molding machineLeshan blow molding machine

Y series blow molding machine Related products

COPYRIGHT © 2016 Guangdong Leshan Intelligent Equipment Corp., Ltd ALL RIGHTS RESERVED